Silage and Baleage Feed-Out Worksheet
A feed-out worksheet turns herd size and feed intake into a daily removal rate. Taking enough from the face each day keeps silage fresh and bales used before they spoil.
Why it matters
Slow feed-out lets air in and heats the face, wasting valuable feed. Fast feed-out means you run short. Calculating both ahead of time shows whether your storage size fits your herd before you fill it.
Step by step
- Count animals and estimate as-fed intake per head per day, then multiply for the daily herd need in pounds.
- For a pit or bunker, find face area in square feet by multiplying width by height, and note density.
- Divide daily need by density, then by face area, then multiply by 12 for inches removed per day.
- For bales, divide the bale weight by the daily need to see how many days one bale lasts.
- Compare days of supply with days until you can replace it, and adjust herd size or storage to match.
What good looks like
A good worksheet shows daily need, face removal depth and days of supply, with removal fast enough to keep the face cool and supply long enough to last until new feed.
Worked example
Illustrative bunker: face 10 feet wide by 6 feet high is 60 square feet. At 40 pounds per cubic foot and 1,200 pounds daily, you remove 30 cubic feet, or 6 inches. Baleage: 30 head at 26 pounds is 780 daily; a 1,300 pound bale lasts 1.67 days, so 60 bales last 100 days. Check: 780 divided by 1,300 is 0.6 bale per day, so a bale lasts 1.67 days.
Common mistakes to avoid
- Using dry matter intake with as-fed density, which mixes two different bases.
- Leaving the face ragged, so air gets deep into the silage.
- Ignoring shrink and waste when you calculate how long the supply lasts.
- Opening more bales than you can feed within a few days.
Safety, legal and compliance notes
Silage faces can collapse and release gases. Stay clear of overhanging faces, and ask your extension office or a safety professional about safe removal and loader practices.
What to record
Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.
When to ask for help
Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.
Frequently asked questions
How much should I remove from the face daily?
Enough to keep it fresh, often several inches in warm weather. Calculate from your herd's daily need, density and face area using this worksheet.
Should I add waste to the calculation?
Yes. Add a waste or shrink allowance based on your own experience, since actual supply will be less than the packed total.
What if my herd size changes?
Rerun the worksheet with the new head count. Daily need, removal depth and days of supply all change in direct proportion to herd size.
Related guides
- Silage Basics for Small Farms
- Making Baleage Step by Step
- Straw vs Hay for Bedding and Feed
- Baleage Moisture and Wrapping Checklist
- Hay and Forage Basics
- Hay Types and Uses Compared
More from the network
Farm news, humor and ranch life at farm.FM.