Hay and Forage Exchange

Baleage Moisture and Wrapping Checklist

This checklist walks through baleage from moisture check to final inspection, so each lot gets tested, each bale is wrapped on time and every stack is checked for holes during storage.

Why it matters

Many baleage failures trace to a few common causes: moisture outside the target range, slow wrapping, thin plastic or unnoticed holes. A written list catches each of these early, before feed and money are lost.

Step by step

  1. Test moisture on several samples across the field before baling, and write the readings on the checklist with the time.
  2. Confirm bales are firm and uniform, and tag or mark any soft bale so it is fed first.
  3. Record the time of baling and the time of wrapping, and keep the gap to a few hours at most.
  4. Count film layers on the first bales of each run, check overlap and tightness, and tape any visible tear immediately.
  5. Inspect stacked bales weekly for holes, pests and standing water, and log the date and repair on the sheet.

What good looks like

A completed checklist shows moisture in range, a short time to wrap, verified layers and weekly hole checks, with every repair dated and every soft bale marked for feeding first.

Worked example

Illustrative sample: moisture readings are 48, 52 and 56 percent, which average 52 percent (156 divided by 3). Baled at 10:00, wrapped at 12:00, a 2 hour gap. Wrapper makes 2 layers per revolution at half overlap, so 3 turns gives 6 layers. Week 1 inspection finds 3 holes in 50 bales, 6 percent (3 divided by 50), all taped the same day. All figures are made up.

Common mistakes to avoid

  • Testing only one spot and assuming the whole field has the same moisture.
  • Waiting a day to wrap because the wrapper was busy.
  • Never counting layers, so thin wrap on some bales goes unnoticed for months.
  • Leaving small holes unpatched, which lets air and moisture in all winter.

Safety, legal and compliance notes

Wrappers and loaders cause serious injuries. Ask your equipment dealer or extension safety program for training, and keep bystanders clear whenever machinery is working or moving bales.

What to record

Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.

When to ask for help

Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.

Frequently asked questions

What moisture range should baleage have?

Targets vary by forage and wrap type, often around the middle range between dry hay and silage. Check local guidance from your extension office.

How do I check wrap layers?

Count the layers on a few bales as the wrapper runs, and confirm overlap. Machine counters help, but a visual check is still worthwhile.

How often should I inspect stored bales?

Weekly is a good rule at first, and also after storms, animal activity or handling. Patch holes quickly with tape made for the film.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.