Hay and Forage Exchange

Making Baleage Step by Step

Baleage is wet hay baled tight and wrapped in plastic to ferment. It lets you make forage in uncertain weather, but moisture, speed and wrap quality decide the final outcome.

Why it matters

Rain delays can ruin dry hay, while baleage saves quality by shortening drying time. The method fails if bales are too wet or dry, wrapped slowly, or punctured during handling. Doing each step on time is what makes it work.

Step by step

  1. Mow at the right stage, spread the crop wide, and wilt it to your target baleage moisture range.
  2. Check moisture with a meter or test sample before baling, and delay baling if the crop is still too wet.
  3. Bale tight and uniform, since dense bales hold less air, then move them to wrapping within a few hours.
  4. Wrap each bale with several overlapping layers of film, tight and wrinkle free, and patch any hole you find.
  5. Stack bales on a clean, well drained site, on end if possible, and check for holes weekly until feeding.

What good looks like

Good baleage smells sweet and tangy, has an even tight wrap, and shows no mold, slime or heat on opening. It feeds well and keeps its quality over months in storage.

Worked example

Illustrative: 1,000 pounds of fresh forage at 80 percent moisture holds 200 pounds dry matter. Wilting to 55 percent moisture means 45 percent dry matter, so the weight is 200 divided by 0.45, or 444 pounds. About 556 pounds of water left in the field. A bale holding 1,300 pounds at 55 percent moisture then holds 585 pounds of dry matter (1,300 times 0.45). All numbers are made up.

Common mistakes to avoid

  • Baling wet forage and letting it sit unwrapped for a day.
  • Using too few layers of film, or wrapping loosely so air gets in.
  • Dragging bales across rough ground or stubble that punctures the film easily.
  • Never checking bales for holes in the weeks after wrapping them.

Safety, legal and compliance notes

Bale handlers and wrappers have pinch points and heavy loads. Follow the machine's manual and ask your equipment dealer or extension safety program about training before operating them.

What to record

Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.

When to ask for help

Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.

Frequently asked questions

How many layers of film are enough?

Many producers use four to six layers, depending on film and storage time. Follow your film maker's guidance and local extension advice.

How soon after baling should I wrap?

As soon as possible, ideally within a few hours. Delays let oxygen build up and spoilage organisms grow before fermentation properly starts.

Can I make baleage from any forage?

Many grasses and legumes work if moisture and harvest stage are right. Very coarse or stemmy forage can puncture film and pack poorly.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.