Preventing Mold in Wrapped Forage
Mold in wrapped forage grows where oxygen gets in, so prevention means keeping air out from baling day onward. Moisture, wrap quality, speed and storage all play a part in the outcome.
Why it matters
Moldy forage can lower intake, hurt performance and sicken animals. Even small holes can spoil part of a bale, so preventing entry of air is much cheaper than sorting out and discarding spoiled feed later.
Step by step
- Bale within the right moisture range, since forage that is too dry holds more air and traps less acid-forming sugars.
- Wrap quickly, keep tension firm, and apply enough overlapping layers that no thin spots remain on the bale ends.
- Store bales on a smooth, well drained site, away from trees, sharp stubble, rodents and other things that puncture film.
- Inspect weekly for holes, pecked film and trapped water, and patch each hole right away with film tape.
- At feeding, discard any moldy or slimy forage, and feed opened bales promptly before air spoils the rest.
What good looks like
A good result is a tight, intact wrap with no holes, a clean sour smell when opened, and no visible mold beyond a thin layer at the edges that you can discard.
Worked example
Illustrative weekly check: 120 bales, 9 with holes, so 9 divided by 120 is 7.5 percent. If each unpatched hole spoils about 100 pounds, that is 900 pounds. At $0.05 per pound, the loss is $45, so patching within a day or two pays. Patching all 9 holes with tape costing about $1 per hole is $9, a saving of $36 (45 minus 9). All figures are made up.
Common mistakes to avoid
- Storing wrapped bales in tall grass where rodents and birds damage film.
- Patching holes with ordinary tape that peels in cold or wet weather.
- Feeding visibly moldy forage because it is only a small part of the bale.
- Stacking bales so tightly that you cannot walk around and inspect them.
Safety, legal and compliance notes
Moldy forage can contain toxins harmful to animals and people. If animals show illness after eating wrapped forage, stop feeding it and call your veterinarian.
What to record
Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.
When to ask for help
Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.
Frequently asked questions
Is some surface mold normal?
A thin layer at the edges can occur, but discard it. Widespread mold, slime or a sharp odor means the forage should not be fed.
Can I feed moldy baleage to cattle?
Not safely. Mold can carry toxins that affect health and performance. Ask your veterinarian before feeding any questionable forage to any animal.
What causes holes in wrapped bales?
Rodents, birds, sharp stubble, handling equipment and weather are common causes. Careful handling, smooth storage sites and weekly inspection prevent many holes from forming.
Related guides
- Silage Basics for Small Farms
- Making Baleage Step by Step
- Straw vs Hay for Bedding and Feed
- Baleage Moisture and Wrapping Checklist
- Hay and Forage Basics
- Hay Types and Uses Compared
More from the network
Farm news, humor and ranch life at farm.FM.