Hay and Forage Exchange

Truckload Math for Hay Buyers

A truckload has two limits: space on the deck and weight on the axles. Whichever limit you reach first sets how much hay you really get per trip on that truck.

Why it matters

Buyers often assume a full truck equals a certain number of tons. Light bales run out of space before weight, heavy bales run out of weight first, and each case changes delivered cost per ton.

Step by step

  1. Measure usable deck length and width, then work out how many bales fit across, along and stacked high.
  2. Multiply those three counts to get the maximum bale count by space, and note it down.
  3. Find the legal and safe payload, divide by average bale weight, and round down to get the count by weight.
  4. Choose the smaller count as your real limit, then multiply by average bale weight and divide by 2,000 for tons.
  5. Divide total hay cost plus freight by those tons to get your real delivered price per ton.

What good looks like

A good calculation shows both limits, picks the smaller, and ends with a delivered cost per ton that matches what the truck can really carry, not an optimistic guess taken from a quote.

Worked example

Illustrative: payload allows 22 tons, and bales weigh 1,100 pounds, so by weight 44,000 divided by 1,100 gives 40 bales. Deck space allows only 36 bales. Load is 36 times 1,100, or 39,600 pounds, which is 19.8 tons. At $110 per ton, hay costs $2,178. With $500 freight, delivered cost is $2,678, or $135.25 per ton (2,678 divided by 19.8). All figures are made up.

Common mistakes to avoid

  • Assuming every truck carries the same tons whatever the bale type.
  • Rounding up the bale count when you should always round down to whole bales.
  • Forgetting to subtract the tarp, straps and dunnage from payload.
  • Ignoring that wet bales weigh more and may hit the weight limit first.

Safety, legal and compliance notes

Axle and gross weight limits are legal limits, not suggestions. Check them with your state transportation agency, and use a certified scale before running heavy loads on public roads.

What to record

Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.

When to ask for help

Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.

Frequently asked questions

Why does my truck carry fewer tons than quoted?

Quotes often assume heavy bales. Light or loosely baled hay fills the deck before it reaches the weight limit, so tonnage falls.

Which limit usually matters for round bales?

Round bales often hit space first when light, but weight first when dense. Always calculate both before agreeing to a per-load price.

Should I buy by the load or the ton?

Tons are fairer because they tie to weight. If buying by the load, state the bale count and average bale weight in writing.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.