How to Sample Hay for Testing
A forage test is only as good as the sample. A representative sample pulls cores from many bales in one lot and mixes them into a single bag for the lab.
Why it matters
A sample from one nice-looking bale can give results that miss the real lot by a wide margin. Reliable results protect buyers from overpaying and help sellers price their hay honestly and defend it fairly.
Step by step
- Define the lot: same field, same cutting and cut within a few days, and never combine lots in one sample.
- Choose bales at random across the lot, avoiding obviously odd bales, and use a clean sharp coring probe.
- Drive the probe straight into the bale end or round bale side, and take full-depth cores each time.
- Combine cores in a clean bucket, mix gently, fill the bag, squeeze out air and seal it.
- Label with lot, date and bale count, ship fast to a lab, and keep notes on where the bales were.
What good looks like
A good sample is clean, mixed and labeled, comes from a defined lot, and arrives at the lab fresh. Repeat samples from the same lot give similar results, which builds trust.
Worked example
Illustrative example: a lot holds 400 bales and you core 20 of them, which is 5 percent of the lot. Taking one core per bale, you combine 20 cores into a single sample bag. A lot of only 40 bales is better served by coring 10 or more, which is 25 percent. Label the bag with the lot name and date.
Common mistakes to avoid
- Sampling only the easiest bales at the front of the stack.
- Mixing different cuttings or fields together into one sample bag.
- Using a dull probe that crushes leaves and loses fine material.
- Leaving the bag in a hot truck before shipping to the lab.
Safety, legal and compliance notes
Coring probes and drills are sharp and powered, so wear gloves and eye protection. Climb stacks only with stable footing and check with a lab or extension office for current sampling guidance.
What to record
Keep a dated hay file: field and cutting, harvest and baling dates, bale counts and weights, moisture at baling, forage test results, storage location, sales or purchase prices and the animals fed. Good records let you compare cuttings, plan winter feed and settle disputes with buyers.
When to ask for help
Weight, moisture, weed-free certification, hauling and sales tax rules vary by state. Talk with your extension forage specialist, a forage testing lab, your state department of agriculture and your insurance agent before you buy, sell, store or haul large amounts of hay. The state directory lists agencies and resources in every state.
Frequently asked questions
How many bales should I core?
Follow your lab's guidance, often around twenty bales for a typical lot. Smaller lots need a higher share of the bales cored.
Can I use a hand grab sample?
Grab samples tend to favor leaves and fall short of the full bale. A probe taking full-depth cores is far more representative.
How often should I retest?
Test each new lot, and retest if storage was wet or heating occurred. Results describe the hay as sampled, not how it looks months later.
Related guides
- Reading a Forage Test Report
- Relative Feed Value and Quality Explained
- Forage Test Log Worksheet
- Judging Hay by Sight and Smell
- Bale Weights and Sizes Explained
- Hay Moisture and Heating Risks
More from the network
Farm news, humor and ranch life at farm.FM.